Sewable 3V coin cell battery holder - Cat# 70-3208822

In stock
SKU
70-3208822
CA$4.15
  • Buy 2 for CA$3.80 each and save 8%
  • Buy 6 for CA$3.45 each and save 17%
  • Buy 20 for CA$3.10 each and save 25%
Quick Overview
Sewable 3V coin cell battery holder - Cat# 70-3208822

This battery holder is by far the easiest way to add a battery to a small wearable project. By coincidence, there are two small 1mm diameter holes in the metal connection tabs, just large enough for a #5 or smaller needle to pass through. One tab connects to common ground (negative) and the other tab is +3 Volts.

This holder is meant to be used with Lithium CR2032 (20mm diameter, 3.2mm thick) sized coin batteries. These are almost always 3V at about 200+ mAh capacity. Lithium coin cells are not rechargeable but they are very easy to find, available at any grocery store.

Inserting the coin is easy, the holder is very sturdy, and it snaps out with a push. Its got a nice flat plastic back that you can easily glue in place for extra mechanical stability.

Holder is also widely known by product # BA2032SM

0
Rating:
0% of 100
Write Your Own Review
You're reviewing:Sewable 3V coin cell battery holder - Cat# 70-3208822
Your Rating

Top Products